Digi WR21 - VPN Configuration for Android Operating Systems

BAS-SVX069F-EN
31
Figure 31. Configuring the network (default gateway)
d. Click OOKK twice more to save your changes.
16. To activate the new VPN connection:
a. Return to the Network and Sharing Center and click CCoonnnneecctt ttoo aa nneettwwoorrkk.
b. Select the newly created connection.
c. Verify that the user name and password were entered and click CCoonnnneecctt.
d. When the connection completes, open a Web browser and connect to the Tracer BAS
using its local IP address.
17. To disconnect from the VPN, return to the Network and Sharing Center. Click on the VPN
connection and click DDiissccoonnnneecctt.
VPN Configuration for Android Operating Systems
Depending on the model and version of your Android device, the selections described in the
following procedure may vary.
1. Open SSeettttiinnggss.
2. In the Wireless and Networks section, tap MMoorree nneettwwoorrkkss..
CCuussttoommeerr RReemmoottee AAcccceessss CCoonnffiigguurraattiioonn