8
BAS-SVX069F-EN
Project Planning
Choosing the Appropriate Firewall Router Kit
Internal Mount Kit (Part# WR21-NOCELL-TRANEKIT-INTERNAL)
If there is room within the Tracer BAS enclosure, order the Internal Mount Kit. The firewall router
must be installed inside the Trane enclosure or in close proximity to the enclosure.
Packaging includes:
• Firewall router
• DIN rail
• Locking barrel to wire power supply (wire to PM014)
• Ethernet patch cable (1 ft)
External Mount Kit (Part# WR21-NOCELL-TRANEKIT-EXTERNAL)
If there is no room within the Tracer BAS enclosure, or installation within the enclosure is not
desired, order the External Mount Kit. The firewall router must be installed in close proximity to
the enclosure.
NNoottee:: Location must not be more than 300 ft from the Tracer BAS controller due to Ethernet
cabling restrictions.
Packaging includes:
• Firewall router
• 120V power supply ready to plug into an electrical wall outlet
• Ethernet patch cable (1 ft)
Project Development Tools
There are two tools that have been created to support the development of your projects: CSET
Shapes and Estimator Assemblies. Estimator assemblies are provided for the Trane Firewall
Router solution, which include both firewall router kits (see the following figures for examples).
To Next Page
Loading...
