44
BAS-SVX069F-EN
Configure the LAN IP Address on a PC
When configuring the Digi WR21 router, it is often necessary to connect to different IP addresses
and often DHCP will be disabled. Therefore, you must manually configure your IP address to
connect to a specific IP.
1. On a Microsoft Windows PC, click SSttaarrtt (or the windows icon) in the bottom left corner, then
select CCoonnttrrooll PPaanneell
2. Navigate to NNeettwwoorrkk aanndd SShhaarriinngg CCeenntteerr. On the left side of the new window, select
CChhaannggee aaddaapptteerr sseettttiinnggss
Figure 41. Change Adapter Settings
3. Locate the connection named LLooccaall AArreeaa CCoonnnneeccttiioonn, and then right click on this and select
PPrrooppeerrttiieess
Figure 42. Selecting Local Area Connection
4. The Local Area Connection Properties dialog box appears. Highlight IInntteerrnneett PPrroottooccooll
VVeerrssiioonn 44 ((TTCCPP//IIPPvv44)) and then select PPrrooppeerrttiieess.
To Next Page
Loading...
