C|24 Guide92
Recording Audio
To record audio:
1 Record-enable the tracks where you want to
record by pressing their Record Enable switches.
2 Arm the Pro Tools transport for recording by
pressing the Record switch in the Transport sec-
tion.
3 Press the Play switch in the Transport section.
4 When you are finished, press the Stop switch
in the Transport section.
To cancel a recording pass:
Hold Shift (add) and press the Stop switch in
the Pro Tools Transport.
Loop Recording Audio
To loop record audio:
1 Press the Link Edit and Timeline switch in the
Tools & Functions section so that it is lit.
2 Press the Loop Record switch in the Transport
Modes section so that it is lit.
3 Enable pre- and post-roll by pressing the Pre-
Roll and Post-Roll switches in the Transport
Modes section.
4 Select the range in the Edit window that you
want to loop.
5 Record-enable the tracks where you want to
record by pressing their Record Enable switches.
6 Arm the Pro Tools transport for recording by
pressing the Record switch in the Transport sec-
tion.
7 Press the Play switch in the Transport section.
8 When you are finished, press the Stop switch
in the Transport section.
QuickPunch Recording
To punch in/out while audio recording with
QuickPunch:
1 Press the QuickPunch switch in the Transport
Modes section so that it is lit.
2 Enable pre-roll by pressing the Pre-Roll switch
in the Transport Modes section.
3 Place the playback cursor at a location before
the punch-in point.
4 Record-enable the tracks where you want to
record by pressing their Record Enable switches.
5 Arm the Pro Tools transport for recording by
pressing the Record switch in the Transport sec-
tion.
6 Press the Play switch in the Transport section.
7 When you reach a punch-in point, press the
Record switch in the Pro Tools Transport.
8 When you reach a punch-out point, press the
Record switch in the Pro Tools Transport again.
Recording MIDI
To record MIDI:
1 Enable the click by pressing the Click switch
in the Tools & Functions section so that it is lit.
2 Enable either Wait For Note or Countoff by
pressing the corresponding switch in the Tools
& Functions section so that it is lit.
3 Record enable the MIDI or Instrument tracks
where you want to record by pressing their
Record Enable switches.
4 Arm the Pro Tools transport for recording by
pressing the Record switch in the Transport sec-
tion.
5 Press the Play switch in the Transport section.
To Next Page
Loading...
