DigiDesign Control 24 - User Manual

Control|24™

Summary

Chapter 1: Introduction to Control|24

System Requirements and Compatibility

Details system requirements and compatibility information for using Control|24.

Ethernet Connections

Explains how to establish Ethernet connections for Control|24 communication.

Chapter 2: Installing Control|24

Installation and Maintenance Guidelines

Provides guidelines for installing and maintaining the Control|24 unit safely.

Making Necessary Connections

Details the essential power and Ethernet connections for Control|24.

Chapter 3: Audio Connections

Chapter 4: Mic and Line Preamps

Microphone and Line Preamps

Describes the 16 preamps for mic/line signals and DI inputs on Control|24.

Preamp Connections

Provides instructions on connecting preamps to Pro Tools audio interface or patch bay.

Chapter 5: Surround Setups

Surround Monitoring Mode Connections

Details connections for multi-channel Surround monitoring modes (LCRS, 5.1).

5.1 Monitoring Example

Provides a visual example of Control|24 monitoring output connections for 5.1 mixing.

Chapter 6: Starting Up and Configuring Control|24

Starting Up and Shutting Down a System

Provides the correct order for starting up and shutting down Pro Tools system components.

Pro Tools Configuration

Details how to configure Pro Tools for communication with Control|24 via Ethernet.

Transport Controls

Primary Transport Controls

Chapter 8: Control Room Monitor Section

Chapter 9: Working with Tracks

Chapter 10: Navigation and Editing

Chapter 11: Recording

Starting the Recording Process

Record Modes

Setting Up Cue Mixes

Chapter 13: Plug-Ins and Inserts

Assigning a Plug-In

Plug-In Flip Mode

Chapter 14: Automation

Automation Mode

Automation Write to Start;All;End

DigiDesign Control 24 Specifications