Appendix B: Utility Functions 135
Timecode Display Test Mode
Timecode display test mode will continually cy-
cle through a series of automated tests which
check the LEDs and LED segments on the time
display located on the meter bridge of Con-
trol|24.
When “time code” display test mode is
engaged:
• The encoder switch LED located below the
scribble strip which shows “Timecode” will
light solid indicating that this is the chosen
test mode.
• All other display test menu items shown on
the scribble strips as well as their associated
flashing encoder switch LEDs, will remain vis-
ible in this test mode. This allows you to select
another display test mode without the need
to first “Exit” this mode.
• Press the flashing encoder switch located be-
low the scribble strip showing another test
mode to simultaneously disengage the time-
code display test mode and enter the newly
selected mode. The encoder switch LED for
the new choice will light solid while the other
choices flash.
• When finished, press EXIT.
Scribble Strip Test Mode
Scribble strip test mode will continually cycle
through a series of automated tests which check
the segments on the LCD scribble strips.
When “Scribble” test mode is engaged:
• The encoder switch LED located below the
scribble strip which shows “Scribble” will
light solid indicating that this is the chosen
test mode.
• All other display test menu items shown on
the scribble strips as well as their associated
flashing encoder switch LEDs, will remain vis-
ible in this test mode. This allows you to select
another display test mode without the need
to first “Exit” this mode.
• Press the flashing encoder switch located be-
low the scribble strip showing another test
mode to simultaneously disengage the scrib-
ble display test mode and enter the newly se-
lected mode. The encoder switch LED for the
new choice will light solid while the other
choices flash.
• When finished, press EXIT.
To Next Page
Loading...
Need help?
General
