Chapter 13: Plug-Ins and Inserts 109
Chapter 13: Plug-Ins and Inserts
Using Plug-Ins in Real Time
Control|24 provides complete access and con-
trol to the five inserts on each Audio Track, Aux-
iliary Input track, or Master Fader.
Control|24 is equipped with dedicated DYN,
EQ, and general-access INSERTS switches on
each of its 24 channel strips. In addition, Plug-
In Flip mode converts the channel faders into
effect parameter controls.
This chapter explains how to use Control|24 to
work with inserts and plug-ins. Refer to the Di-
giRack Plug-Ins Guide for details on using specific
plug-ins, or to the manufacturer’s documenta-
tion provided with any third-party plug-ins.
INSERTS Section
Located to the right of the channel bar display is
the INSERTS section, that contains four
switches, labeled MASTER BYPASS, COMPARE,
INSERTS/PARAM, and PLUG-IN SAFE. These
switches provide editing and mode access to
plug-ins.
INSERTS/PARAM Switch
The INSERTS/PARAM switch has two operating
states: Inserts View mode and Parameters View
mode.
Inserts View Mode
When the INSERTS/PARAM switch LED is not lit,
you can select a channel by pressing the individ-
ual channel INSERTS switches. The channel
scribble strips will display the selected channel’s
five available insert positions.
Parameters View Mode
When the INSERTS/PARAM switch LED is lit,
you can press a channel’s INSERT switch to see
the selected plug-in’s parameters displayed for
editing on the channel scribble strips.
AudioSuite plug-ins are not available from
Control|24
To Next Page
Loading...
Need help?
General
