Need help?Do you have a question about the DigiDesign C24 and is the answer not in the manual?
General| Type | Control Surface |
|---|---|
| Channels | 24 |
| Compatibility | Pro Tools |
| Faders | 24 motorized |
| Inputs | 8 analog line inputs |
| Outputs | 8 analog line outputs |
| Aux Sends | N/A (Control surface only) |
| Connectivity | Ethernet, MIDI |
| Display | LCD scribble strips |
| Power Supply | External power supply |
Introduction to the C|24 control surface and its capabilities for Pro Tools.
Details the control and analog audio features of the C|24.
Outlines the necessary system components and compatibility information for the C|24.
Provides physical dimensions and specifications for the C|24 unit.
Explains power and Ethernet connection requirements for setting up the C|24.
Provides an overview of the C|24's hardware layout and functionality.
Describes the layout and functions of the C|24's top control surface.
Details the various connectors and ports located on the rear of the C|24.
Guides through the installation and initial setup of the C|24.
Provides instructions for physically setting up the C|24 unit.
Details the Ethernet connection process for communication with Pro Tools.
Outlines the correct sequence for powering Pro Tools systems with C|24.
Explains how to set up the C|24 within the Pro Tools environment.
Details the process of declaring the C|24 unit in Pro Tools for communication.
Describes how to adjust operational preferences directly on the C|24 unit.
Details the 16 analog preamplifiers, including input types and controls.
Explains the functionality of the built-in 8x2 analog line submixer.
Covers the controls for the 6-channel control room monitoring system.
Illustrates basic stereo monitoring setups using the C|24.
Provides a diagram and explanation for a typical stereo studio setup.
Provides an example setup for 5.1 surround sound monitoring.
Details all the physical controls and their functions on the C|24 for Pro Tools.
Details the 24 channel strips, including faders, mute, and solo controls.
Explains the function and controls of the multi-purpose rotary encoders.
Describes controls for inserts, assignments, pan, and sends on the channel strip.
Covers the switches for controlling Pro Tools transport and navigation functions.
Details the meter bridge, including output meters and main counter displays.
Explains the analog controls for monitoring, cue routing, and talkback.
Details controls for gain, source selection, and phantom power for preamplifiers.
Covers input level controls and master output for the line submixer.
Explains the different operating views and modes available on the C|24.
Explains how to display pan and send assignments across all channels.
Describes how to focus on controls for a single track, like pan or sends.
Covers Normal, Master Faders, and Flip modes for fader operation.
Details how to assign inputs, outputs, inserts, and sends using the C|24.
Covers basic session management tasks like saving and creating tracks.
Details how to enable tracks, arm the transport, and initiate recording.
Covers zooming, paging, and selecting audio within the Pro Tools Edit window.
Explains how to display master faders and work with automation features.
Provides pinout details for DB-25 connectors on the C|24.
Lists pinout details for monitor section connections.
Details pinouts for XLR microphone and TRS connectors.
Explains how to access and navigate the C|24's utility functions.
Describes how to perform diagnostic tests on the C|24 unit's components.
Covers settings for Talkback, preamplifiers, and footswitch operations.
Provides information on firmware versions, Ethernet, and unit naming.
To Next Page
