DigiDesign C24 User Manual

C|24 Guide84
Modifying Groups
To modify a group:
1 Press the Modify switch in the Groups section.
Current groups are shown in the LCD displays,
with the group ID in the top row, and the group
name in the bottom row.
2 Select the group you want to modify by press-
ing the corresponding encoder switch. Group
members are indicated by lit Channel Select
switches. Track names are shown in the top row
of LCD displays.
3 Press Channel Select switches to add or re-
move tracks from the group.
4 Press the Modify switch to confirm the
changes.
Deleting Groups
To delete a group:
1 Press the Delete switch in the Groups section.
Current groups are shown in the LCD displays,
with the group ID in the top row, and the group
name in the bottom row.
2 Press lit encoder switches to delete the corre-
sponding groups.
3 Do one of the following:
• Press the Enter switch to confirm the dele-
tion.
– or –
• Press the Esc/Cancel switch to cancel and
leave groups unchanged.
4 When you are finished deleting groups, press
the flashing Delete switch.
To suspend all groups:
 Press the Suspend switch in the Groups sec-
tion. The Suspend Groups switch follows latch-
ing behavior, and flashes to indicate groups are
suspended.
To exit Suspend Groups mode:
 Press the flashing Suspend Groups switch.
Window Configuration View
C|24 lets you open and close the Window Con-
figuration list and lets you display and select
Window Configurations from the control sur-
face. Window Configuration names are shown
in the bottom row of the LCD displays.
If there are more Window Configurations than
can be shown at once on the LCD displays. the
Channel Bar Scroll switch flashes.
To toggle display of the Window Configurations list
on-screen:
 Press the Window Configuration (Win Cfg)
switch.
To toggle display of Window Configurations in the
LCD displays:
 In Home view, hold the Command/Ctrl Mod-
ifier switch and press the Window Configura-
tion (Win Cfg) switch.
To recall a Window Configuration:
 In Window Configuration view, press the en-
coder switch that corresponds to the Window
Configuration name in the LCD display.
Deleting groups cannot be undone.

DigiDesign C24 Specifications

General

Type	Control Surface
Channels	24
Compatibility	Pro Tools
Faders	24 motorized
Inputs	8 analog line inputs
Outputs	8 analog line outputs
Aux Sends	N/A (Control surface only)
Connectivity	Ethernet, MIDI
Display	LCD scribble strips
Power Supply	External power supply