Chapter 6: C|24 Pro Tools Controls 45
Channel Bar
The Channel Bar spans the center of the Fader section of C|24, and includes controls for inserts, chan-
nel assignments, pan display, send display, and Soft Key functions.
Inserts Section
Master Bypass Switch
The Master Bypass switch bypasses plug-ins in
one of two ways, depending on the current
view.
Insert Select View The Master Bypass switch by-
passes all plug-ins on the focused channel.
Parameter View The Master Bypass switch by-
passes only the plug-in currently shown in the
LCD displays.
The Master Bypass switch lights to indicate that
the currently displayed plug-in is bypassed. The
Master Bypass switch flashes to indicate that at
least one channel of a currently displayed multi-
mono plug-in is bypassed.
Compare Switch
The Compare switch lets you compare any plug-
in changes to the currently loaded plug-in set-
tings. This mirrors the function of the Compare
button in Pro Tools plug-in windows. The Com-
pare switch lights to indicate that controls on a
plug-in have been changed but not saved as a
preset.
Safe Switch
The Safe switch enables plug-in automation safe
mode for the currently displayed plug-in. The
Safe switch lights when an automation safed
plug-in is focused.
Insert/Parameter Switch
The Insert/Parameter switch toggles the C|24
view between Insert Select view and Parameter
view, and accesses multi-mono plug-in setup
page. When an insert’s parameters are shown in
the LCD displays, the Insert/Param switch
lights.
See “Parameter View” on page 80 and “Setting
Up Multi-mono Plug-ins” on page 81.
Channel Bar
Inserts
section
Assign
section
Pan
section
Soft Keys
switch
Sends
section
Channel Bar
Scroll
switches
Inserts section of the Channel Bar
Master Bypass
switch
Compare
switch
Safe
switch
Insert/
Parameter
switch
To Next Page
Loading...
Need help?
General
