DigiDesign C24 User Manual

Chapter 5: Connecting Your Studio 27
Chapter 5: Connecting Your Studio
Connection Examples for
Stereo Monitoring
You can set up a basic stereo monitoring system
using 2-channel input from Pro Tools. This in-
put can be monitored on channels 1 (Left) and 3
(Right) of the C|24 Main Monitor outputs, or in
the C|24 Alt Monitor (Stereo) outputs.
Another stereo source can be monitored by con-
necting it to channels 1 (Left) and 3 (Right) of
the Alternate Surround Inputs.
Additional stereo sources can be monitored by
connecting them to the External Stereo 1 and 2
Inputs.
You can also connect a separate cue send from
Pro Tools, and route it to the C|24 cue system
outputs.
The following tables and diagram show exam-
ples of connections for stereo monitoring.

DigiDesign C24 Specifications

General

Type	Control Surface
Channels	24
Compatibility	Pro Tools
Faders	24 motorized
Inputs	8 analog line inputs
Outputs	8 analog line outputs
Aux Sends	N/A (Control surface only)
Connectivity	Ethernet, MIDI
Display	LCD scribble strips
Power Supply	External power supply