Chapter 6: C|24 Pro Tools Controls 49
Sends Section
The Sends section switches are used in Console
view to focus sends in the LCD displays. Send
volume is controlled by the encoders.
F-J switch
The F-J switch selects the bank of Sends accessi-
ble from the Sends switches.
When the F-J switch is off, the Sends switches
control Sends A through E. When the F-J switch
is on, the Sends switches control Sends F
through J.
Sends Switches
The Sends switches (A-E, F-J) are used to focus a
single Send position in the LCD displays, across
all tracks. The switches light to indicate the cur-
rently focused Send.
Channel Bar Scroll Switches
The Channel Bar Scroll switches are used to
bank the display of parameters, sends, memory
locations, window configurations, or groups in
the LCD displays.
The Channel Bar Scroll switches light when ad-
ditional parameters are available in the corre-
sponding direction.
Miscellaneous Controls
Edit Mode Switches
The Edit Mode switches place Pro Tools directly
in the corresponding Edit mode. The switch
lights to indicate the current mode.
Shuffle Switch Places Pro Tools in Shuffle mode.
Spot Switch Places Pro Tools in Spot mode.
Slip Switch Places Pro Tools in Slip mode.
Grid Switch Toggles Pro Tools between Absolute
and Relative Grid mode.
See “Selecting Edit Tools” on page 101.
Sends section of the Channel Bar
F-J
switch
Sends
switches (A-E/F-J)
Edit Mode switches
Shuffle
switch
Spot
switch
Slip
switch
Grid
switch