DigiDesign C24 User Manual

Chapter 6: C|24 Pro Tools Controls 37
Chapter 6: C|24 Pro Tools Controls
Fader Section
Channel Strip
Fader
Each channel has a touch-sensitive motorized
fader for controlling channel volume in Normal
mode and a wide range of parameters in Flip
mode. When you are automating a parameter
on a fader in Touch mode, touching the fader
starts writing automation.
Mute Switch
The Mute switch toggles mute status for the
channel. When a track is muted, its Mute switch
lights solid. When a track is implicitly muted
(because another track is soloed), its Mute
switch flashes.
Solo Switch
The Solo switch toggles solo status for the chan-
nel. When a channel is soloed, the Solo switch
lights, and the Mute switches on other channels
in the session flash to indicate implicit mute.
The Solo switch function follows the Pro Tools
Solo Latch options (Latch, X-OR, and Momen-
tary).
Solo Safe Mode To solo safe a track, hold the
Command/Ctrl Modifier switch and press the
track’s Solo switch. When a track is solo safed,
its Solo switch flashes once.
Channel Strip
Fader
Mute switch
Solo switch
Channel
Record Enable
switch
Encoder switch
Rotary Encoder
LCD display
Send switch
Dyn switch
Automation Mode
Input Monitor
switch
Insert switch
EQ switch
Automation
Select switch
Mode
indicators
switch

DigiDesign C24 Specifications

General

Type	Control Surface
Channels	24
Compatibility	Pro Tools
Faders	24 motorized
Inputs	8 analog line inputs
Outputs	8 analog line outputs
Aux Sends	N/A (Control surface only)
Connectivity	Ethernet, MIDI
Display	LCD scribble strips
Power Supply	External power supply