EasyManuals Logo

DigiDesign C24 User Manual

DigiDesign C24
138 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #107 background imageLoading...
Page #107 background image
Chapter 9: Working with C|24 99
To vertically scroll the contents of the Edit window
or Mix window:
1 Focus the window you want to scroll by click-
ing in it or by pressing the corresponding win-
dow key.
2 Hold the Shift (add) Modifier switch while
turning the Scrub/Shuttle Wheel.
Selecting Audio
To move the cursor or Edit selection up or down
one track:
1 Press the Navigate switch.
2 Press the Up or Down Arrow switch.
To extend an Edit selection up or down one track:
1 Press the Navigate switch.
2 Hold Shift and press the Up or Down Arrow
switch.
To create selections with the Scrub/Shuttle
wheel:
1 Locate the cursor in a track.
2 Do one of the following:
Hold the Mark In switch and turn the
Scrub/Shuttle wheel counter-clockwise to
create or extend the selection to the left.
– or –
Hold the Mark Out switch and turn the
Scrub/Shuttle wheel clockwise to create or
extend the selection to the right.
To scrub while adding to the front of a selection:
Hold the Ctrl/Win+Shift (add) Modifier
switches while scrubbing the front of the selec-
tion.
To scrub while adding to the end of a selection:
Hold the Ctrl/Win+Shift (add)+Opt/Alt (all)
Modifier switches while scrubbing the end of
the selection.
To scrub with fine resolution while adding to the
front of a selection:
Hold the Ctrl/Win+Shift (add)+Com-
mand/Ctrl Modifier switches while scrubbing
the front of the selection.
To scrub with fine resolution while adding to the
end of a selection:
Hold the Ctrl/Win+Shift (add)+Com-
mand/Ctrl+Alt/Opt (all) Modifier switches while
scrubbing the end of the selection.
Navigating with the Transport
The Transport switches correspond to the con-
trols in the Pro Tools Transport window: Re-
wind, Fast Forward, Stop, Play, and Record. The
following transport functions are also available:
To latch the transport in Rewind:
Hold the Rewind switch and press Fast For-
ward.
To latch the transport in Fast Forward:
Hold the Fast Forward switch and press Re-
wind.
To return the playback cursor to the beginning of
the session:
Press the RTZ/E switch.
To move the playback cursor to the end of the
session:
Hold the Option/Alt (all) switch and press the
RTZ/E switch.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the DigiDesign C24 and is the answer not in the manual?

DigiDesign C24 Specifications

General IconGeneral
TypeControl Surface
Channels24
CompatibilityPro Tools
Faders24 motorized
Inputs8 analog line inputs
Outputs8 analog line outputs
Aux SendsN/A (Control surface only)
ConnectivityEthernet, MIDI
DisplayLCD scribble strips
Power SupplyExternal power supply

Related product manuals