DigiDesign C24 User Manual

C|24 Guide100
Scrubbing Audio in the Edit
Window
To scrub audio in Scrub mode:
1 While Pro Tools is stopped, press the Scrub
switch.
2 Rotate the Scrub/Shuttle wheel clockwise to
scrub audio forward, or counter-clockwise to
scrub audio backward.
3 To exit, press the Scrub switch again.
To latch the Scrub/Shuttle wheel in scrub mode:
 Press the Ctrl/Win Modifier switch momen-
tarily (less than 1/2 second) while turning the
Scrub/Shuttle wheel.
To scrub with fine resolution:
 Hold the Command/Ctrl+Ctrl/Win Modifier
switches while turning the Scrub/Shuttle Wheel.
Scrubbing Without Entering Scrub
Mode
You can use the Scrub/Shuttle wheel to scrub
while the transport is stopped or during play-
back, without entering Scrub mode.
To scrub during playback:
1 Click in a track you want to scrub.
2 Hold the Ctrl/Win Modifier switch while turn-
ing the Scrub/Shuttle wheel.
Scrubbing while Trimming a Region or
Selection
(Pro Tools HD Only)
To use Trim/Scrub mode:
1 Navigate to a region or selection you want to
trim.
2 Press the Trim switch.
3 Press the Scrub switch.
4 Rotate the Scrub/Shuttle wheel to move the
cursor to the trim location.
5 To trim to the cursor location or to the begin-
ning of the selection, press the Trim switch
again.
Shuttling Audio in the Edit Window
(Pro Tools HD Only)
To use Shuttle mode:
1 While Pro Tools is stopped, press the Shuttle
switch.
2 Rotate the Scrub/Shuttle wheel clockwise to
shuttle forward, or counter-clockwise to shuttle
backward.
3 To exit, press the Shuttle switch again.
To trim to the end of a selection, hold
the Opt/Alt (all) Modifier switch while
pressing the Trim switch.

DigiDesign C24 Specifications

General

Type	Control Surface
Channels	24
Compatibility	Pro Tools
Faders	24 motorized
Inputs	8 analog line inputs
Outputs	8 analog line outputs
Aux Sends	N/A (Control surface only)
Connectivity	Ethernet, MIDI
Display	LCD scribble strips
Power Supply	External power supply