DigiDesign C 24 - Page 78

C|24 Guide70
To open the Send window a Send on a track:
1 Press the Send switch in the track’s channel
strip.
2 If necessary, scroll the LCD display to show
the Send position whose window you want to
open.
3 Hold the Ctrl/Win Modifier switch and press
the encoder switch that corresponds to “more.”
To adjust levels for a Send on a track:
1 Press the Send switch in the track’s channel
strip.
2 If necessary, scroll the LCD display to show
the Send position you want to adjust.
3 Turn the encoder that corresponds to the
name of the Send position.
To adjust pan position of a Send on a track:
1 Press the Send switch in the track’s channel
strip.
2 If necessary, scroll the LCD display to show
the Send position you want to adjust.
3 Turn the encoder that corresponds to “Snd-
Pan.”
Muting Sends in Pan/Send Channel
View
To toggle the mute state of a send on a track:
1 Press the Send switch in the track’s channel
strip.
2 If necessary, scroll the LCD display to show
the Send position you want to mute.
3 Press the encoder switch that corresponds to
“mute.”
 When a Send is muted, the LCD display shows
s “MUTE” (all uppercase).
 When a Send is not muted, the LCD display
shows “mute” (lowercase).
To mute all sends on a track:
1 Press the Insert/Send Bypass switch so that it is
lit.
2 Press the Send switch in the track’s channel
strip.
To mute all sends at the same Send positions on
all tracks:
1 Press the Insert/Send Bypass switch so that it is
lit.
2 Do one of the following:
• Press the Do To All switch.
• Hold the Option/Alt (all) switch.
3 Press the Send switch in a track with a send at
the appropriate Send position.