DigiDesign C 24 - Page 98

C|24 Guide90
To show/hide the MIDI and Counter sections of
the Transport window:
 Hold the Opt/Alt (all) Modifier switch and
press the Transport switch.
To show/hide the Pre/Post-Roll section of the
Transport window:
 Hold the Command/Ctrl+Ctrl/Win Modifier
switches and press the Transport switch.
Moving Windows On-Screen
To move a Pro Tools window horizontally on-
screen:
 In the Windows section, hold the switch for
the window and turn the Scrub/Shuttle wheel.
To move a Pro Tools window vertically on-screen:
1 In the Windows section, hold the switch for
the window, and begin turning the Scrub/Shut-
tle wheel.
2 Release the switch for the window and hold
Shift to move the window on-screen.
Displaying Track Output Windows
To open/close the Output window for a track:
1 Press the Home switch to put C|24 in Pan
Console view.
2 Hold the Ctrl/Win Modifier key and press the
channel’s encoder switch.
To open/close Output windows for multiple
tracks:
1 Press the Home switch to put C|24 in Pan
Console view.
2 Hold the Ctrl/Win+Shift (add) Modifier
switches and press the encoder switch on each
channel whose window you want to open or
close.
To close all open Output windows:
 Hold the Opt/Alt (all) Modifier switch and
press the Pan switch in the Windows section.
Displaying Send Windows
To open/close a Send window:
1 Display a Send position (A-J) across all tracks
by pressing the corresponding Send switch in
the Sends section of the Channel Bar.
2 Hold the Ctrl/Win Modifier key and press the
encoder switch on the channel whose Send win-
dow you want to open/close.
To open/close Send windows for multiple tracks:
1 Display a Send position (A-J) across all tracks
by pressing the corresponding Send switch in
the Sends section of the Channel Bar.
2 Hold the Ctrl/Win+Shift (add) Modifier
switches and press the encoder switch on each
channel whose window you want to open/close.
To close all open Send windows:
 Hold the Opt/Alt (all) Modifier switch and
press the Pan switch in the Windows section.