D i g i g r a m
Installation under Windows 2000 and XP
If the driver has been downloaded from our web site, it has to be expanded
prior to the driver’s installation as follows: double-click on the downloaded
file (self-expanding). You can use the default destination location (Windows
temporary folder) or select another directory.
• Shut down your computer and insert your PCX card.
• Restart your computer.
• Click on Cancel if the Found New Hardware Wizard appears.
• Double-click on the setup.exe icon to launch the driver installation.
• The License Agreement window appears: read it, and click on Yes to
approve it. Do the same for the Read Me First window.
• Choose the destination folder where Setup will install the
application files (\pcxnp by default). Note that the driver files are
installed in \windows\system32\Drivers\Digigram. Click on Next
• Check the option “driver for the second group of boards”, and
check the associated option “Wave” if you want to also install the
Wave driver. Click on Next.
• As some components of Virtual PCX are installed, a license
agreement of Virtual PCX is displayed. Read it and click on Yes to
continue the installation.
• Select the program folder where the program icons will be added.
Click on Next.
• Click on Next to start copying the files.
• Click on Continue anyway in the Hardware installation window
(Windows XP).
• In the “Digigram drivers” window, select the number and the size
of buffers required by your applications. Click on Ok.
• In the “InstallShield Wizard Complete” window, select 'Yes, I want
to restart my computer now' and click on Finish to complete the
driver installation.
12
To Next Page
Loading...
