PCX924
v2
, PCX924-Mic & PCX22
v2
User’s Manual
Supported operating systems
PCX924v2 and PCX22v2 cards run under Windows 98 (SE and Millennium),
Windows 2000, and Windows XP, the PCX924-Mic under Windows 2000
and Windows XP only.
HARDWARE INSTALLATION
Note: Under Windows 2000 and XP, the card has to be installed in the
computer prior to installing its driver.
Under Windows 9x, first install the driver, and then insert the card.
Installing the card
Gently plug the card in a free PCI slot and press it down to position it firmly.
Tighten the screw.
Interrupt and memory address
Hardware interrupt and addresses are automatically set up at start-up by the
PCI PnP BIOS.
WARNING
The PCX924-Mic includes a microphone pre-amplifier, which is sensitive to
electro-magnetic perturbations.
In order to avoid spurious noise when using the microphone input, we
recommend not to install the PCX924-Mic close to another card equipped
with a fan. If this happens try to have some free slots between the two cards.
9
To Next Page
Loading...
