Digigram PCX22v2 - Removing the Driver under Windows 2000 and XP

PCX924 v2 , PCX924-Mic & PCX22 v2
User’s Manual
Note: If you have done an installation previously without selecting the
Wave driver, and you now want to install this driver, please proceed
as follows:
• Open the Windows Control Panel and double-click on the
Add/Remove Software icon.
• Select “Digigram np Runtime…”, and Change/Remove.
• Select Modify in the np Runtime window. Next.
• Check the Wave option for the second group of boards. Next.
• Click on Continue anyway in the Hardware installation window
(Windows XP).
• Click on Finish in the Maintenance complete window.
The Wave driver is now installed.
Removing the driver under Windows 2000 and XP
• Open the Windows Control Panel and double-click on the
Add/Remove Software icon.
• Select “Digigram np Runtime …”, and Change/Remove.
• Select “Remove” in the np Runtime window.
• Follow the instructions to finish to remove the driver.
13