Digigram PCX22v2 - Technical Specifications; Configuration, I;O, and Audio Specs

PCX924 v2 , PCX924-Mic & PCX22 v2
User’s Manual
SPECIFICATIONS
CONFIGURATION (all cards)
Bus/Format PCI slave mode
Size
175 mm × 99 mm
Digital Signal Processor 56303 at 100 MHz
Power requirements
(+3.3V / +5V / +12V / –12V) 0.5 A / 0.1 A / 0.2 A / 0.1 A
Operating: temp / humidity
(non-condensing)
0°C / +50°C • 5% / 90%
Storage: temp / humidity
(non-condensing)
-5°C / +70°C • 0% / 95%
INPUTS / OUTPUTS (PCX924 v2 and PCX924-Mic)
Analog line inputs (mono)
2 balanced
∗
Maximum input/impedance
+22 dBu/ >10kΩ
Programmable input gain digital and analog
Digital inputs (stereo)
1 AES/EBU
∗∗
Other inputs
LTC, CD-ROM (+10 dBu),
2 GPI (dry contact)
Analog outputs (mono)
2 servo-balanced
∗∗∗
Maximum output/impedance +22 dBu/low impedance
Programmable output gain digital and analog
Digital outputs (stereo)
1 AES/EBU
∗∗
Other outputs
headphone (600 Ω), two GPO
(relay, 0.5A, 48 VCC)
Access to main status bits
of digital frame
Yes
AES11 synchronization Yes
Connectors
15-pin Sub-D for analog I/O; 15-pin HD
Sub-D for digital I/O, sync., and GPIO;
headphone jack 3’5 (female TRS 3,5 mm)
∗
can be used with unbalanced signals
∗∗
can be used as S/PDIF interface as well
∗∗∗
electronically servo-balanced outputs provide automatic level adjustment to accommodate
either balanced or unbalanced lines
15