Digigram PCX22v2 - System Requirements; Hardware & Software Requirements

D i g i g r a m
• When using the np SDK:
- panning, cross-fades, punch-in/punch-out, scrubbing, time-
stretching, pitch-shifting, format and frequency conversions
- inter-board synchronization of multiple PCX924 cards in one PC
- synchronization via an LTC (SMPTE) time code input
PCX22 v2
• Decoding and mixing of several PCM (8, 16 and 24 bits) and MPEG
Audio streams (Layer 1, II & III)
• When using the np SDK:
- panning, cross-fades, scrubbing, time-stretching, pitch-shifting, format
and frequency conversions
PCX924-Mic additional software features
• Software control of the microphone input:
gain, 48 V switch, analog compressor-limiter-expander parameters
• Additional 24-bit DSP effects on the output in playback:
3-band parametric equalizer and Maximizer
PCX924 v2 and PCX22 v2 optional software features
• Additional 24-bit DSP effects on the output in playback:
3-band parametric equalizer and Maximizer
HARDWARE REQUIREMENTS
PCX924v2, PCX924-Mic, and PCX22v2 cards have been developed for IBM and
IBM-compatible PC systems.
Minimum requirements
• Pentium III minimum (or equivalent)
• 128 MB RAM
• One free PCI slot (5 V or 3.3 V)
SOFTWARE REQUIREMENTS
To use your PCX924v2 or PCX22v2 card, you have to install the driver from the
np Runtime package version 6.01 or higher.
The PCX924-Mic requires the installation of np Runtime version 6.30 or
higher.
These packages also include a Wave driver that may be installed so that the
card can be used with standard multimedia applications.
8