39
The following items can be purchased
separately:
Digimet Printer:
Large Hard Carrying Case: This case can
hold the Digimet 3000, accessories, the
Digimet Printer & cables and the AC wall
transformer.
Packing List
Depending on the configuration purchased,
your shipment could include different items.
Items included with your Basic DIGIMET
3000 packaging.
1. DIGIMET 3000
2. Standard Fabric Carrying Case with strap
(continued on next page)
Use of Stainless Needle
When using the needle to puncture
rubber components, be sure the inside of
the needle is absolutely clear of
obstructions. A thin piece of wire can be
used to clear the inside of the needle of
any obstruction once the needle has
been inserted into the rubber component.
Obstructions, i.e. small pieces of
rubber inside the needle, will affect
readings.
Serial Number
The DIGIMET 3000 serial number is
located on the back of the unit at the
bottom of the label. It also appears on the
initial screen when the unit is turned on.
Configurations
The Digimet 3000 is sold in a few
different configurations depending on the
users’ requirements.
Basic Digimet 3000:
This package includes the Digimet 3000,
Standard Carrying Case, tubing &
accessories, computer cable, computer
software disk and manual.
Digimet 3000 Complete:
This package includes the Digimet 3000,
Large Carrying Case, Digimet Printer, AC
wall transformer, tubing & accessories,
printer cable, computer cable, computer
software disk and manual.
Side view
To Next Page
Loading...