Digistar TMR3610 - Maintenance Message

26 TMR3610 Operators Manual D4023-EN
11.9 Maintenance Message
Message can be used to alert the user of maintenance needed to be done on the equipment.
Rotation Counter Sensor Kit--(p/n: 408088) needed for this feature. For proper maintenance
Schedule, refer to equipment operators manual(s).
1. Enter D.A.N. 8011
2. Press . The user may edit the
maintenance message using keypad or
upload via USB.
3. Mantmg 1 is displayed on LCD, then edit
maintenance message by using
keypad.
Example: Pressing key pad “1” one time
will show 1, pressing two times will show
“A”, pressing three times will show “B”,
pressing four times will show “C”.
Mantmg 1
1
2
Advance Commands
3