RD440 small remote display
RD2400V backlit remote display with 1.7” high numbers
RD2400V backlit remote display w/transmitter and installed receiver
RD2400 backlit remote display with 1” high numbers
RD2400 backlit remote display w/transmitter and installed receiver
RD4000 remote display
Use with EZ3610 indicator. Sensor allows operator to
program indicator to count auger or PTO rotations for
accurate mixing of feed. Also used for keeping
maintenance log for equipment. Example; At 50
hours of operation time PTO shaft is scheduled for
greasing or engine oil is scheduled for changing. For
proper equipment maintenance needed, refer to
equipment operator manual.
To Next Page
Loading...
