Digistar TMR3610 - 13 Manual Programming of Recipes; Switch to Manual Programming; Change Entry Method

32 TMR3610 Operators Manual D4023-EN
13.0 MANUAL PROGRAMMING OF RECIPES
Three different Entry Methods for entering ingredients:
Amount per Animal (this is the default setting)
Allows entry of ingredient amounts required for feeding one animal. Indicator calculates preset
amounts required for each ingredient.
Percent (%) Per Load
Enter ingredient amounts in (%). Indicator calculates amounts for each ingredient. Total of all
ingredients must equal 100% in this mode.
Amount per Load
Allows entry of ingredient amounts required per load.
13.1 Switch to Manual Programming
13.2 Change Entry Method
1. Enter 6054
2. Press .
3. Press again to switch from pc to
scale.
Select PC to program recipes with
computer.
Select SCALE to manually program
recipes with scale indicator.
4. Press .
1. Enter 6101
2. Press .
3. Repeatedly press scrolls
Select one of the following entry methods:
1 = Amount per Animal
2 = Percent (%) per Load
3 = Amount per Load
4. Press .
6054
6101
1
1
2
2
3
3
Manual Programming of Recipes
4
4