Digistar TMR3610 - Page 50

50 TMR3610 Operators Manual D4023-EN
SETTING
[display]
D.A.N.
NO.
OPTIONS [displayed]
BOLD=DEFAULT
DESCRIPTION
INGREDIENT
RE-SIZING
(INGSIZ)
6053
(PC)OFF, 1 ING, 1+2 ING,----
(SCALE) OFF, 1ING, 1 ING+P
Selects Automatic Ingredient
Re-Sizing mode. D.A.N. 6054
select PC or SCALE.
PROGRAM RECIPE
(PROGRAM)
6054
PC, SCALE
Selects program method, PC
or at SCALE.
MENU 6.1- BATCHING
ENTERY METHOD
(E MTHD)
6101
1-amount/animal, 2-percent/load,
3-amount/load
Select batching method.
D.A.N. 6054 must be set to
“SCALE”.
DISPLAY SCOOP %
(SCOOP %)
6102
OFF, ON
If ON - displays scoop
percentage to load. D.A.N.
6054 must be set to
“SCALE”.
INGREDIENT
NAMES
(INGRNM)
6103
ON, OFF
If ON - displays ingredient
names while batching. D.A.N.
6054 must be set to
“SCALE”.
ACCUMULATION
(ACCUM)
6104
ON, OFF
If ON – load/unload weights
are accumulated while
batching. D.A.N. 6054 must
be set to “SCALE”.
MENU 6.2- 3610/4610 BATCHING
FORCE USER ID
(USERID)
6201
OFF, ON
If ON - operator MUST enter
User ID to use scale.
RECIPE KEYS
(RECKEY)
6202
OFF, ON
If ON - disables certain keys
when Loading / Unloading
Recipe.
BATCH NUMBER
(BATNUM)
6203
PCCTRL, EZCTRL
Select either PC or EZ to
control the batch number.
Direct Access Numbers (D.A.N.)