The RP-7 Valve’s pitch bending effect allows you to smoothly shift between two preset pitch intervals using the CC Pedal.
Amount Selects the function of the Whammy™ Module. There are 16 functions available in regular Whammy
Modules. They are as follows:
1= Up 1 Octave 9=Down 1 Oct - Up 1 Oct
2=Up 2 Octaves 10=Down 4th - Down 3rd
3=Down 2nd Reversed 11=Up 5th - Up 6th
4=Down 2nd 12=Up 4th - Up 5th
5=Down 4th 13=Up m3rd - Up Maj 3rd
6=Down 1 Octave 14=Up 2nd - Up 3rd
7=Down 2 Octaves 15=Shallow Detune
8=Down 6 Octaves 16=Deep Detune
Whammy The Whammy Parameter reflects the current setting of the Whammy™ effect. This Parameter should be
linked to the RP-7 Valve’s CC pedal. As Position is modified, the pitch of the original note will change in
intervals according to the setting of the WHAMMY TYPE. Ranges from 0 to 100.
The RP-7 also offers intelligent harmony pitching that lets you select the key, scale and amount of shifting in the signal. The parameters are
as follows:
Amount Amount lets select how much the pitch is shifted. This Ranges from: -Octave down-Octave Up
Key This parameter lets you select which key the harmony shifting takes place in. This ranges from: A to G#.
Scale This parameter lets you select the scale that is being used in the Harmony effect. There are fourteen
different scales and they are numbered as follows: 1. Major 2. Minor 3. Harmonic Minor 4. Melodic
Minor 5. Dorian 6. Mixolydian 7. Lydian 8. Lydian Augmented 9. Major Pentatonic 10. Minor
Pentatonic 11. Blues 12. Whole Tone 13. Half-Whole Dimished 14. Whole-Half Dimished
Note: For complete reference guide to these scales, please refer to the Harmony interval charts located in the Appendix section on
page 21.
To Next Page
Loading...
Need help?
General
