9
9. LOOP Knob
Adjusts the level of your recorded loop and overdubs in the mix. When set to the 12 o'clock position, loop
playback level will match the guitar input level (unity gain).
10. DRUMS Knob
Adjusts the level of the drums in the mix.
11. BASS Knob
Adjusts the level of the bass in the mix.
12. SIMPLE BASS Button
Enabling this button will select a simpler bass line. This button has 3 states, they are:
• Off — The TRIO+ will play an active bass line that fits with the detected chords (this is the default
setting).
• Green — The TRIO+ will play a simplified bass line, playing only the root notes of each chord.
• Red — The TRIO+ will play an even simpler bass line, playing only the first root note of each bar and
sustaining it until the next bar.
13. microSD Card Slot
A compatible microSD card (included) must be properly installed in this slot for the TRIO+ to operate. If a
compatible microSD card is not detected, all PART buttons will flash amber. See 'microSD Card Information'
on page 4 for further information on microSD card installation and compatibility.
To Next Page
Loading...
Need help?
General
