1
1 Introduction
Thank you for choosing a Dimplex Heat
Pump. The Dimplex A class heat pump
combines outstanding performance to
maximise year-round efficiency no
matter what the weather conditions. It
can also deliver high output and high
temperatures even at outside air
temperatures of -7. The sophisticated
controller makes the system easy to
use and there are many more
technological innovations including a
scroll compressor that uses enhanced
vapour injection.
2 Scope of delivery
Please ensure you check the scope of
delivery before signing any delivery
documentation. Claims for missing or
damaged parts after signing for the
delivery will not be accepted.
There are 3 options to select from when
installing a Dimplex Heat Pump:
Pack 1 - Space heating and Dimplex
A Class Cylinder
To install the heat pump and
Dimplex A class cylinder together
you must purchase Pack 1 which
contains necessary components
shown in the tables below. A
separate wiring centre is not
required as the wiring centre is built
into the cylinder. The ACCHYPK
Hydraulics pack contains the all of
the necessary hydraulic
components.
Pack 2 - Space heating and Dimplex
Standard Heat Pump Cylinder
To install the heat pump for space
heating and domestic hot water but
not using an A class cylinder you
must purchase Pack 2 which
contains the necessary components
shown in the tables below. A
separate wiring centre is required to
wire the circulation pumps and zone
controls since this is not supplied on
the cylinder. The ACCHYPK
Hydraulics pack contains the all of
the necessary hydraulic
components.
Pack 3 – Space heating only
To install the heat pump for space
heating only, you must purchase
Pack 3 which contains the necessary
components shown in the tables
below. A separate wiring centre is
required to wire the circulation
pumps and zone controls. The
ACSSHYPK Hydraulics pack contains
the all of the necessary hydraulic
components.
To Next Page
Loading...
Need help?
General
