NOTE:
In all modes, except holiday mode, and can be used to
adjust the required room temperature.
NOTE:
It is recommended that the timer is used as doing so can
reduce the running cost. Operating the appliance in the
permanent heating modes as Boost, Auto Boost or Setback
may result in increased running costs.
The heater comes pre-programmed with a set of heating profiles. There are three
options available - two pre-programmed and one user adjustable timer;
1. User Timer (pre-programmed, factory default) - provides greatest flexibility
to the user. Four time slots are available throughout the day and these can be
customised for each day of the week. Factory default times: 06.30 until 09.30,
11.00 until 13.00, 15.00 until 17.00, 18.00 until 22.00.
2. Out All Day (pre-programmed) - has the following preset times Monday to
Sunday, which can be altered if desired 07.00 until 08.30 17.30 until 22.00,
(factory default times).
3. Holiday - set the date of return and the temperature required. 7°C is advised
if you just want to protect the property from frost while you are away.
The heater can also maintain a constant room temperature using the following
modes;
1. Boost mode heats the room to a selected temperature for 1, 2 or 3 hours.
2. Auto Boost Function maintains a room temperature during comfort periods,
when the core is depleted.
3. Setback mode maintains a room temperature outside comfort periods. This
mode should be used to provide protection against frost or where big drops in
temperature are unwanted.
Modes of Operation
19
To Next Page
Loading...
Need help?
General
