NOTE:
The extra charge option will lead to more energy being stored during
the o peak period, this will lead to higher running costs. Only use this
setting when a room is consistently below the required temperature
and yo are sure that the timer mode is set up and selected correctly.
Press and hold Enter for five seconds to enter the User Information menu;
Open Window detection (OW), when enabled, the heater will reduce the target room
temperature to limit the energy waste when an open window is detected. Disabled as
default.
Factory Reset returns all settings to the factory presets.
Extra Charge - forces an extra charge of up to seven hours during o-peak periods.
If the output of the heater is not able to deliver the required comfort level then it is
possible to force the heater to store additional energy. In this way more electrical
energy is stored during the o-peak period and this will increase comfort levels.
Up to seven hours additional o-peak charging can be selected.
User Info
Open Window
Factory
Extra Charge
User Information
25
To Next Page
Loading...
Need help?
General
