Dimplex XLE Series - Service

In order to enter the Service menu, Back, Menu & Enter must be pressed simultaneously
and held for 10 seconds.
Charge Time - for Service personnel use only.
Slave Mode - for Service personnel use only.
If more than one heater is installed in the same room it is
recommended that the smallest capacity heater is set as a Slave.
Disabled as factory default.
Landlord Lock - for User and Service personnel use.
Allows to lock:
- the ability to select or adjust the Timer Mode
- Use of Boost and Setback functions
- Limit maximum operating temperature
Disabled as factory default.
Default code : 0 0 0 0
Rm Temp Oset - for Service personnel use only.
Allows to set a Room Sensor temperature oset.
Factory pre-set oset as default.
Service
Change Time
Slave Mode
Landlord Lock
Rm Temp Offset
Service
26