16
© 2019 Directed. All rights reserved.
selects the 1-chirp setting. Pressing
selects the 2- chirp
setting.
The valet pulse count feature (2-5) and the Channel 3 Output
(2-10) each have five possible settings. Pressing
toggles
through all the 2-chirp settings.
6. Release the Control Center button.
Once a feature is programmed:
• Other features can be programmed within the same menu.
• Another menu can be selected.
• The Learn Routine can be exited if programming is complete.
To access another feature in the same menu:
• Press and release the Control Center button the number of times
necessary to advance from the feature you just programmed to the
next one you want to program.
• Then press the Control Center button once more and hold it.
For example, if you have just programmed the third feature in the menu
and you would like to program the seventh feature in the menu, you
would then press and release the Control Center button four times and
then press it once more and hold it. The siren chirps seven times to
confirm access to the seventh feature.
To select another menu:
• Press and hold the Control Center button.
• After three seconds, the unit advances to the next menu, the siren
chirps and LED flashes indicating which menu has been accessed.
The Learn Routine exits if any of the following occurs:
• Close the open door.
• Ignition is turned On
To Next Page
Loading...