22
© 2019 Directed. All rights reserved.
again, or the ignition is turns on, it is activated and able to trigger the
system. NPC monitors sensor inputs, but does not bypass ignition trig-
ger. If NPC is turned off the system responds to repeated triggers sensor
inputs, indefinitely. Some states have laws regulating how many times
a security system can trigger before it is considered a nuisance and the
vehicle is towed away.
2-4 Progressive Door Trigger ON/OFF: The system responds to a door
trigger input with a progressive response. When the door is opened
with the system armed, the siren will chirp 10 times prior to the full trig-
gered sequence. The door trigger is still treated as an instant trigger
and closing the door quickly will not prevent a full triggered sequence
from occurring. If the progressive door trigger is programmed off, the
full siren output will occur the moment the door is opened.
2-5 Valet Pulse Count 1-5 Pulses: The system can be pro-
grammed to count the number presses of the Control Center
button before disarming the security system or VRS. The fac-
tory default setting is one pulse. The unit can be set for two to
five pulses using the two-chirp setting to select the pulse count.
2-6 Door Trigger Error Chirp ON/OFF: when programmed ON, if
a door is open during arming, generates an error notification chirp.
When programmed OFF, no notification chirps are generated if a door
is open during arming.
2-7 Ignition-Controlled Domelight Supervision ON/OFF: If turned
ON, domelight illuminates for 30 seconds when the ignition is turned
OFF. Domelight Supervision is an optional feature and may required
additional parts and labor.
To Next Page
Loading...