Directed 403.NISS4HT 2.39 RSR User Manual

22 pages

To Next Page

INSTALLATION GUIDE

DB3

2016 Nissan Versa (Smart Key). 403.NISS4HT 2.39 RSR

This product is intended for installation by a professional installer only! Attempts to install this

product by a person other than a trained professional may result in severe damage to a vehicle’s

electrical system and components.

Questions and Answers:

K
Kerry ParkerAug 29, 2025
Why was the smart key not detected by Directed 403.NISS4HT 2.39 RSR Automobile Accessories?
- M
  Melissa FergusonAug 29, 2025
  The smart key was not detected, which prevents the system from shutting down the vehicle.
M
Mary StanleySep 7, 2025
What to do if my Directed 403.NISS4HT 2.39 RSR Automobile Accessories system says 'Initialization failed'?
- K
  Kara MitchellSep 8, 2025
  Reset the Directed Automobile Accessories module and complete the programming again. If the issue persists, please contact Technical Support.
J
Julie DennisSep 10, 2025
How to fix Directed 403.NISS4HT 2.39 RSR when CAN bus incorrectly detected?
- E
  Erin JensenSep 12, 2025
  Verify the CAN1 and CAN2 connections. Refer to “Installation (wiring diagrams & vehicle wiring reference charts)” to check the connections.
M
mariarichardsSep 13, 2025
What to do if Directed Remote Starter bypass processing error?
- P
  peter78Sep 13, 2025
  The bypass calculation failed. Reset the module and try again. If the condition persists, please contact Technical Support.
M
Mark PetersAug 28, 2025
What to do if transponder functions were skipped in Directed Automobile Accessories?
- R
  Roberto BlairAug 28, 2025
  If compatible and when RXT mode is not desired or convenience features are needed, reset and reprogram the module.
E
Erin SantiagoAug 28, 2025
What to do if Directed Automobile Accessories CAN bus is incorrectly detected?
- J
  Jeffrey DavisAug 28, 2025
  Verify the CAN1 and CAN2 connections. Check the connections.
M
Melissa BrownAug 28, 2025
What to do if MUX is not detected in Directed Automobile Accessories?
- A
  Andres ParkerAug 28, 2025
  The Violet/Green or Violet/Brown wire did not detect the expected voltage value. Check the connections.
Z
znovakAug 28, 2025
What to do if ISO 2 is not detected in Directed Automobile Accessories?
- M
  Michelle SmithAug 28, 2025
  The Orange/Black wire did not detect the expected signal. Check the connections.
R
Rick RodriguezAug 28, 2025
What to do if ISO 1 is not detected in Directed Automobile Accessories?
- M
  Mercedes JordanAug 28, 2025
  The Yellow/Black wire did not detect the expected signal. Check the connections.
K
Katherine OlsonSep 8, 2025
What to do if my Directed Automobile Accessories system shows 'ISO 1 not detected'?
- J
  Jonathan HollandSep 8, 2025
  The Yellow/Black wire did not detect the expected signal. Refer to “Installation (wiring diagrams & vehicle wiring reference charts)” to check the connections.