E
Erin SantiagoAug 28, 2025
What to do if Directed Automobile Accessories CAN bus is incorrectly detected?
- JJeffrey DavisAug 28, 2025
Verify the CAN1 and CAN2 connections. Check the connections.
To Next PageTo Next PageWhat to do if Directed Automobile Accessories CAN bus is incorrectly detected?
Verify the CAN1 and CAN2 connections. Check the connections.
What to do if MUX is not detected in Directed Automobile Accessories?
The Violet/Green or Violet/Brown wire did not detect the expected voltage value. Check the connections.
What does 'RFTD disabled' mean in Directed Automobile Accessories?
If the Directed Automobile Accessories system indicates 'RFTD disabled,' 3x OEM Lock Remote Start Activation was attempted when the RFTD feature is disabled. Make sure 3x Lock Start is selected from the web in the flashing process.
What to do if ISO 1 is not detected in Directed Automobile Accessories?
The Yellow/Black wire did not detect the expected signal. Check the connections.
Why is the smart key not detected by my Directed 403.NISS4HT 2.39 RSR Automobile Accessories?
The smart key was not detected, which prevents the system from shutting down the vehicle.
What does Directed Automobile Accessories stop fail mean?
The RXT start/stop message was received by the module, but not executed on the vehicle.
Why Smart key was not detected in Directed 403.NISS4HT 2.39 RSR?
The smart key was not detected, which prevents the Directed Automobile Accessories system from shutting down the vehicle.
What to do if Directed Remote Starter J1850 not detected?
Check the J1850 wire connection. Wake up the data bus by turning the ignition on and try again.
What to do if CAN2 is not detected in Directed Automobile Accessories?
Check the CAN2 Orange/Green and Orange/Brown wire connections. Wake up the data bus by turning the ignition on and try again. If your installation does not require this connection, skip this step by pressing the programming button 5 times.
What to do if CAN1 is not detected in Directed 403.NISS4HT 2.39 RSR?
Check the connections of the CAN1 Tan and Tan/Black wires. Then, wake up the data bus by turning the ignition on and try again. If your installation doesn't need this connection, skip this step by pressing the programming button 5 times.
General| Brand | Directed |
|---|---|
| Model | 403.NISS4HT 2.39 RSR |
| Category | Automobile Accessories |
| Language | English |
