To Next PageTo Next PageWhat to do if Directed Automobile Accessories says CAN2 not detected?
Check the CAN2 Orange/Green and Orange/Brown wire connections. Wake up the data bus by turning the ignition on and try again. If your installation does not require this connection, skip this step by pressing the programming button 5 times.
What does MUX not detected mean for Directed Automobile Accessories?
If MUX is not being detected by your Directed Automobile Accessories, the Violet/Green or Violet/Brown wire didn't detect the expected voltage value. Refer to “Installation (wiring diagrams & vehicle wiring reference charts)” to check the connections.
What does 'Runsafe was not disabled' mean on my Directed Automobile Accessories?
No UNLOCK command was received prior to opening the door, or the 45 second timer expired in takeover mode.
What does a feature error mean in Directed 403.NISS4HT 2.39 RSR Automobile Accessories?
If the Directed Automobile Accessories system indicates a feature error, an RSR feature file mismatch was detected. Please contact Technical Support.
What to do if Directed 403.NISS4HT 2.39 RSR Automobile Accessories says MUX not detected?
The Violet/Green or Violet/Brown wire did not detect the expected voltage value. Refer to “Installation (wiring diagrams & vehicle wiring reference charts)” to check the connections.
What does Directed 403.NISS4HT 2.39 RSR Automobile Accessories start fail mean?
The RXT start/stop message was received by the module, but not executed on the vehicle.
Why Runsafe was not disabled in Directed 403.NISS4HT 2.39 RSR Automobile Accessories?
No UNLOCK command was received prior to opening the door, or the 45 second timer expired in takeover mode.
What does feature error mean for Directed 403.NISS4HT 2.39 RSR Automobile Accessories?
If you are experiencing a feature error with your Directed Automobile Accessories, an RSR feature file mismatch was detected. Please contact Technical Support.
What to do if Directed 403.NISS4HT 2.39 RSR Automobile Accessories bypass data is not detected?
Check the connection of the bypass line. If multiple wires are used, ensure they are not inverted. Also, verify that the vehicle operates correctly with the factory key.
What to do if CAN1 is not detected in Directed 403.NISS4HT 2.39 RSR?
Check the connections of the CAN1 Tan and Tan/Black wires. Then, wake up the data bus by turning the ignition on and try again. If your installation doesn't need this connection, skip this step by pressing the programming button 5 times.
General| Brand | Directed |
|---|---|
| Model | 403.NISS4HT 2.39 RSR |
| Category | Automobile Accessories |
| Language | English |
