T
Thomas DavenportSep 6, 2025
Why Directed 403.NISS4HT 2.39 RSR Automobile Accessories speed was detected?
- MMichael JohnsonSep 6, 2025
The vehicle was detected as moving, which prevents the system from shutting it down.
To Next PageTo Next PageWhy Directed 403.NISS4HT 2.39 RSR Automobile Accessories speed was detected?
The vehicle was detected as moving, which prevents the system from shutting it down.
What to do if ISO 1 is not detected in Directed Automobile Accessories?
The Yellow/Black wire did not detect the expected signal. Check the connections.
What does ISO 2 not detected mean for Directed Automobile Accessories?
If ISO 2 is not being detected by your Directed Automobile Accessories, it means the Orange/Black wire didn't detect the expected signal. Refer to “Installation (wiring diagrams & vehicle wiring reference charts)” to check the connections.
What does 'Runsafe was not disabled' mean on my Directed Automobile Accessories?
No UNLOCK command was received prior to opening the door, or the 45 second timer expired in takeover mode.
What to do if my Directed 403.NISS4HT 2.39 RSR system displays 'Bypass processing error'?
The bypass calculation failed. Reset the Directed Automobile Accessories module and try again. If the condition persists, please contact Technical Support.
Why was the smart key not detected by Directed 403.NISS4HT 2.39 RSR Automobile Accessories?
The smart key was not detected, which prevents the system from shutting down the vehicle.
What to do if Directed 403.NISS4HT 2.39 RSR Automobile Accessories is waiting to begin the programming sequence?
Make sure you are following the correct programming procedure.
What to do if Directed Automobile Accessories says CAN2 not detected?
Check the CAN2 Orange/Green and Orange/Brown wire connections. Wake up the data bus by turning the ignition on and try again. If your installation does not require this connection, skip this step by pressing the programming button 5 times.
What does 'RFTD disabled' mean in Directed Automobile Accessories?
If the Directed Automobile Accessories system indicates 'RFTD disabled,' 3x OEM Lock Remote Start Activation was attempted when the RFTD feature is disabled. Make sure 3x Lock Start is selected from the web in the flashing process.
What does it mean if Directed Automobile Accessories says ISO 2 not detected?
If the Directed Automobile Accessories system indicates 'ISO 2 not detected,' it means the Orange/Black wire did not detect the expected signal. Consult the “Installation (wiring diagrams & vehicle wiring reference charts)” to verify the connections.
General| Brand | Directed |
|---|---|
| Model | 403.NISS4HT 2.39 RSR |
| Category | Automobile Accessories |
| Language | English |
