To Next PageTo Next PageHow to fix CAN bus incorrectly detected on Directed 403.NISS4HT 2.39 RSR?
If the CAN bus is being incorrectly detected by your Directed Automobile Accessories, verify the CAN1 and CAN2 connections. Refer to “Installation (wiring diagrams & vehicle wiring reference charts)” to check the connections.
What does ISO 2 not detected mean for Directed Automobile Accessories?
If ISO 2 is not being detected by your Directed Automobile Accessories, it means the Orange/Black wire didn't detect the expected signal. Refer to “Installation (wiring diagrams & vehicle wiring reference charts)” to check the connections.
Why was speed detected by Directed 403.NISS4HT 2.39 RSR Automobile Accessories?
The vehicle was detected as moving, which prevents the system from shutting it down.
What to do if Directed 403.NISS4HT 2.39 RSR Automobile Accessories is waiting to begin the programming sequence?
Make sure you are following the correct programming procedure.
What to do if Directed Automobile Accessories Key2GO initiated?
If your Directed Automobile Accessories system displays 'Key2GO initiated', please follow the steps indicated in 'Module programming' to complete the Key2GO programming.
What does Directed 403.NISS4HT 2.39 RSR Automobile Accessories start fail mean?
The RXT start/stop message was received by the module, but not executed on the vehicle.
What does 'RFTD disabled' mean in Directed Automobile Accessories?
If the Directed Automobile Accessories system indicates 'RFTD disabled,' 3x OEM Lock Remote Start Activation was attempted when the RFTD feature is disabled. Make sure 3x Lock Start is selected from the web in the flashing process.
Why is the brake not detected by my Directed 403.NISS4HT 2.39 RSR?
The brakes were not detected, which prevents the system from shutting down the vehicle.
What to do if CAN1 is not detected on Directed Automobile Accessories?
If CAN1 isn't being detected by your Directed Automobile Accessories, verify the connections of the Tan and Tan/Black wires. Try waking up the data bus by turning the ignition on and attempting the process again. If your setup doesn't need this connection, you can skip this step by pressing the programming button 5 times.
What does 'Runsafe was not disabled' mean on my Directed Automobile Accessories?
No UNLOCK command was received prior to opening the door, or the 45 second timer expired in takeover mode.
General| Brand | Directed |
|---|---|
| Model | 403.NISS4HT 2.39 RSR |
| Category | Automobile Accessories |
| Language | English |
