EasyManua.ls Logo

Directed 933.TL16 - User Manual

Directed 933.TL16
23 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
DS3+ / DS4+
933.TL16
v1.03.198.9
2019 Toyota RAV4

Questions and Answers

  • A
    allison50Sep 12, 2025
    What to do if my Directed Remote Starter shows a bypass processing error?
    • C
      Christopher JenkinsSep 12, 2025
      If your Directed Remote Starter encounters a bypass processing error, reset the module and try again. If the problem persists, further assistance may be needed.
  • J
    Jason MorrisSep 12, 2025
    What to do if my Directed Remote Starter is waiting to begin the programming sequence?
    • W
      William ClarkSep 12, 2025
      If your Directed Remote Starter is stuck waiting to begin the programming sequence, ensure that you are following the correct programming procedure.
  • T
    traci04Sep 12, 2025
    Why was Runsafe not disabled on my Directed Remote Starter?
    • D
      Deborah ShepardSep 12, 2025
      If the Runsafe feature wasn't disabled on your Directed Remote Starter, it's likely because no UNLOCK command was received before opening the door, or the 45-second timer expired in takeover mode.
  • D
    Dr. Joy BlackSep 12, 2025
    What to do if transponder functions were skipped on my Directed Remote Starter?
    • F
      fosterabigailSep 12, 2025
      If transponder functions were skipped on your Directed Remote Starter, and if compatible, when the RXT mode is not desired or convenience features are needed, reset and reprogram the module.
  • U
    uchaseSep 12, 2025
    What to do if my Directed Remote Starter shows that ISO 2 is not detected?
    • S
      Sara DavisSep 13, 2025
      The Orange/Black wire didn't detect the expected signal. Check the connections.
  • D
    Damon SandersSep 12, 2025
    What does PTS shutdown error mean on my Directed Remote Starter?
    • V
      Veronica LongSep 12, 2025
      A PTS shutdown error on your Directed Remote Starter means the PTS output from the module was not activated due to safety protection.
  • N
    Nicole WallaceSep 12, 2025
    What to do if my Directed Remote Starter says CAN bus incorrectly detected?
    • L
      Laura HorneSep 12, 2025
      If the CAN bus is incorrectly detected by your Directed Remote Starter, verify the CAN1 and CAN2 connections.
  • R
    Ronald SotoSep 13, 2025
    What to do if my Directed Remote Starter shows that MUX is not detected?
    • J
      Jeffrey SnyderSep 13, 2025
      The Violet/Green or Violet/Brown wire didn't detect the expected voltage value. Check the connections.
  • S
    smithwilliamSep 13, 2025
    Why does my Directed Remote Starter say that the brake was not detected?
    • M
      mayooliviaSep 13, 2025
      The brakes were not detected, which prevents the Directed Remote Starter system from shutting down the vehicle.
  • S
    sara55Sep 13, 2025
    Why does my Directed Remote Starter say that the smart key was not detected?
    • H
      Hayley JonesSep 13, 2025
      The smart key was not detected, which prevents the Directed Remote Starter system from shutting down the vehicle.

Directed 933.TL16 Specifications

General IconGeneral
BrandDirected
Model933.TL16
CategoryAutomobile Accessories
LanguageEnglish

Related product manuals