To Next Page

To Previous Page

21 403.VW06 1.27 2016 Volkswagen Golf (Smart Key)

Feature and option list

It is recommended to configure all the features and options listed below using the configuration tool found on the module flashing

page at www.directechs.com. The web offers more options; however, manual configuration of the features is possible using the

information on this page.

* Default option

Feat. Operation Flashes / Option Description

1 RFTD Output

Type

1. No RF Output* Module is connected to a remote starter using a standard installation.

2. RFTD Output

Module is connected to an XL202 using an RSR or RXT installation (when

available).

3. SmartStart

Module is connected to SmartStart using an RSR or RXT installation (when

available).

2 Unlock Driver

Priority

1. Driver priority*

Unlocks only the driver door when the button is first pressed, and unlocks all

doors when it is pressed a second time within 5 seconds.

2. All Unlocks all doors when the button is first pressed.

3 Smart OEM

Alarm Control

1. Disabled

The OEM alarm will not be controlled by the interface upon remote start. No

disarm or arm command will be executed at the beginning or end of the

sequence; it must be controlled by the Remote Starter.

2. Safelock

Smart OEM Alarm Control will behave like a standard Safelock feature on a

remote starter. It will unlock at the beginning of the sequence, and relock after

start and shutdown.

3. Enabled*

Smart OEM Alarm Control will synchronize with the OEM alarm so that it will

disarm and rearm the vehicle in the remote start sequence, only when required.

Smart OEM Alarm Control will monitor the alarm and door lock status to detect

if the disarm or rearm is required. If the vehicle is unlocked or is not equipped

with factory alarm, the disarm/rearm will not be executed.

Directed DB3 Installation Guide

Other manuals for Directed DB3