9 403.VW06 1.27 2016 Volkswagen Golf (Smart Key)
© 2017-02-08 Directed. All rights reserved.
OEM
Immobilizer
Receiver
10
DBALL2
RF
Prog. Button
LED
4
14 12
2
NO Relay 2: Brown/Red: 12
Common Relay 2: Yellow/Red: 11
NC Relay 2: Orange/Red: 10
Immobilizer ECU
4-6 loops
Note: OEM immobilizer receiver is located
on the underside of the steering column,
where the ignition switch would normally be.
Remove battery from
OEM Remote Control
- Make 4-6 loops and place the around the front of the plastic body of the vehicle’s coded key as
shown above.
- Connect with OEM Immobilier Ring as shown in the above diagram.
- When possible, use valet key for key wrap. if blade key is used, battery must be removed.
Method 3: Key wrap for Push-to-Start (PTS) using OEM immobilizer ring
To Next Page
Loading...
Need help?
General
