EasyManuals Logo

Directed DIRECTWIRE DIRECTECHS 933.TL14 User Manual

Directed DIRECTWIRE DIRECTECHS 933.TL14
62 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #61 background imageLoading...
Page #61 background image
DS4+ FORD6
© 2017-12-13 Directed. All rights reserved.
Quick Reference Guide
Pit stop/idle mode
1
Stop the vehicle in a safe parking spot and put the
gear in Park (P).
Put
gear in
Park
2
Press the Remote Start button on the transmitter.*
The parking lights will flash once to indicate the
vehicle is now in Pit Stop Mode.
Parking lights flash x1
14:36
Press Remote
Start button*
&
3
It is safe to leave the engine running and exit the
vehicle with the factory remote in hand.
Note: We recommend that you always lock the
doors of your vehicle when leaving it unattended.
14:36
Exit vehicle
with remote
* Icon and remote appearance may differ depending on the model purchased.
List of available commands
Note that the information below is for many Viper, Clifford, Python, Autostart and
AstroStart models. Icons and commands may differ depending on the model and
options purchased. Refer to your authorized installation center for more specific
information.
Button(s) Actions
Press & hold for 1 second to lock.
Press & hold for 1 second to unlock.
*
Press & hold for 1 second to remote start.
*
Press & hold for 5 seconds to activate the trunk release (optional).
* Icon and remote appearance may differ depending on the model purchased.
Sending commands to your vehicle
Whether you want to remote start the engine, lock/unlock the doors or pop the trunk,
there are 3 possible ways you can send commands to your vehicle, using the:
Factory remote.
Aftermarket remote.
Directed SmartStart application via your smartphone.
If applicable, you can also start the engine remotely by pressing the Lock button 3
times quickly on your factory remote.
Vehicle takeover with regular key
1
Close the vehicle doors, hood and trunk, then send
the Remote Start command to start the vehicle.*
14:36
Press Remote
Start button*
2
Send the Unlock command on the factory or
aftermarket remote.*
14:36
Press Unlock on
either remote*
3
Enter the vehicle, while making sure the factory
remote is inside with you.
14:36
Enter vehicle
with remote
4
Insert your key in the ignition barrel and turn it to the
ON position.
START
Key OUT
ON
OFF
START
Key IN
ON
OFF
START
Key IN
ON
OFF
START
Key IN
ON
OFF
5
Depress the brake pedal, put the car in gear and
drive off.
Ready to
drive off
* Icon and remote appearance may differ depending on the model purchased.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Directed DIRECTWIRE DIRECTECHS 933.TL14 and is the answer not in the manual?

Directed DIRECTWIRE DIRECTECHS 933.TL14 Specifications

General IconGeneral
BrandDirected
ModelDIRECTWIRE DIRECTECHS 933.TL14
CategoryAutomobile Accessories
LanguageEnglish

Related product manuals