Directed Xpresskit dball 2 User Manual

Quick Reference Guide
DBALL/DBALL2-CHRYSLER7 Range Extender Ready (RXT) Installation
© 2014 Directed. All rights reserved.
Range Extender Ready (RXT) is used to amplify the distance covered
by factory remote starters, which are built into the BCM of the vehicle.
The interface connects to the vehicle and uses the same codes as the
factory remote to remote start the vehicle. The runtime and features are
identical to the ones for the OEM remote starter. Some of the
advantages of RXT are greater distance coverage and 2-way
compatibility.
Range Extender Ready (RXT)
Command Engine Result
Start NOT running. The engine will be started.
Start Running. The engine will be stopped.
The following table describes the behavior of the vehicle in relation to the RXT
feature. The following commands are performed on the aftermarket remote.
Runtime
Refer to vehicle owner's manual.
Runtime Reset
Refer to vehicle owner's manual.
RXT Operations
Button(s)
Actions
Press & hold for 1 second to lock.
Press & hold for 1 second to unlock.
Press & hold for 1 second to remote
start.
Press & hold for 5 seconds to activate
the trunk release (optional).
Press once, then to activate the
rear hatch/tail glass release (optional).*
Press 3 times, then to activate
the panic mode.
Press once, then to reset the
remote starter runtime.
List of Available Commands
x1 +
x3 +
x1 +
* This output is configurable. see your authorized installation center for more
information.
Note that the information below is for Viper, Clifford and Python models. Icons and
commands may differ depending on the remote brand and model purchased. Refer
to your authorized installation center for more information.

Directed Xpresskit dball 2 Specifications

General

Brand	Directed
Model	Xpresskit dball 2
Category	Automobile Accessories
Language	English