Complete the Job - 68 SK3000 Operator’s Manual
Rinse Equipment
Rinse Equipment
1. Spray water onto equipment to remove dirt and mud.
2. Remove mud from track sprockets.
3. Wash undercarriage.
Disconnect Attachment
1. Lower attachment to the ground.
2. Shut off machine.
3. Disconnect hydraulic hoses, if used.
4. Disconnect electrical connection, if used.
5. Start engine.
6. Disengage attachment pins.
7. Tilt mount plate forward and back machine away from attachment.
Stow Tools
Ensure all tools and accessories are loaded and properly secured on trailer.
Store Machine
Before storing, ensure machine is rinsed, equipment is stowed, and all fluids are filled. For more
information for filling fluids, see Maintenance chapter or contact your Ditch Witch dealer.
NOTICE:
• Never spray water onto operator’s console or electrical center in engine compartment. Water can
damage electrical components. Wipe down instead.
• Ensure all mud and debris is rinsed from tracks before parking unit overnight.