Maintenance - 78 SK3000 Operator’s Manual
Maintenance Interval Chart
Maintenance Interval Chart
IMPORTANT: Chart indicates first instance of repeated maintenance procedures. See detailed
information below.
Adjust, service, or test Change, initial Lube, initial
Check Change Lube
Service
Startup
10 Hours
50 Hours
250 Hours
500 Hours
1000 Hours
As Needed
Battery
Belt, fan
Coolant
Dust ejector valve
Engine compartment
Filter, air
Filter, engine oil (see Oil, engine)
Filter, fuel
Filter, hydraulic fluid
Filter, water separator
Fluid, hydraulic
Fuel hose
Fuse box
Hydraulic hoses
Intake air line
Oil, engine
Platform switch
To Next Page
Loading...
