Drive - 52 SK3000 Operator’s Manual
Start
Start
Initial Use
Machine will come preset with default owner and operator passcodes. Change passcodes immediately
upon purchase of machine. See “Passcode setting menu key” on page 44.
Default owner passcode: 9 + last four digits of machine serial number.
Default operator passcode: last four digits of machine serial number.
EMERGENCY SHUTDOWN: Shut off machine or press remote engine stop button (if equipped).
Misuse of machine can cause death or serious injury.
Read and understand operator’s manual and all other safety instructions
before use. Know how to use all controls.
To help avoid injury:
• Allow hydraulic fluid time to warm before operating in cold weather. Cold hydraulic fluid can
lengthen ground drive stopping time.
• For starting in extreme temperatures, contact your Ditch Witch dealer.
Pre-heater. Fire or explosion can cause death or serious
injury. Never use starter fluid.
NOTICE: If engine turns but does not start within 10 seconds, allow starter to cool. Wait at least 30
seconds and try again.