Ditch Witch SK3000 User Manual

SK3000 Operator’s Manual Prepare - 27
Prepare Equipment
Assemble Accessories
If required, mount fire extinguisher near the power unit but away from possible points of ignition. The fire
extinguisher should always be classified for both oil and electric fires. It should meet legal and regulatory
requirements.
Connect Attachment
1. Position attachment on level surface with
enough space behind it to accommodate
machine.
2. Start engine.
3. Ensure attachment pins are disengaged.
4. Tilt attachment plate (2) forward.
5. Position attachment plate in upper lip of
receiver plate (1) on attachment.
6. Raise lift arms while tilting back attachment
plate and engage pins.
NOTICE: Use only Ditch Witch-approved attachments. Attachments can change the stability and
operating characteristics of the machine. See attachment operation manual for instructions regarding
proper operation of attachments.
IMPORTANT: Before connecting attachment to machine, ensure that attachment (1) and receiver
plates (2) are free of dirt and debris.
IMPORTANT:
• See “Attachment pin control” on
page 50.
• If necessary, drive forward while
tilting back attachment plate to
engage pins.
t62om005w19.eps
1
2
t62om006w19.eps
12

Ditch Witch SK3000 Specifications

General

Engine Make	Kubota
Fuel Type	Diesel
Engine Power	74 hp
Lift Height	132 in (3353 mm)
Gross Power	74 hp
Height to Hinge Pin	132 in (3353 mm)
Horsepower	74 hp