Specifications - 98 SK3000 Operator’s Manual
UK Declaration of Conformity
UK Declaration of Conformity
The Charles Machine Works Inc., PO Box 66, 1959 West Fir Avenue, Perry, Oklahoma, USA, declares that the following unit(s):
Conform(s) to the following UK national laws:
S.I. 2001 No.1701 (Noise), S.I. 2008 No.1597 (Machinery Safety), and S.I. 2016 No.1091 (EMC).
Each model listed has been evaluated with the following standards and/or other normative documents:
EN 474-1:2006+A6:2019
EN 474-3:2006+A1:2009
EN ISO 13766-1:2018
Notified Body:
Data for Noise Regulation (S.I. 2001 No. 1701)
Determined in accordance with ISO 6395:2008.
Conformity Assessment: Schedule 9
Data for S.I. 2019 No. 583 (Fluorinated Greenhouse Gases) (if equipped with cab):
The Technical Construction File is maintained at the manufacturer’s location.
This declaration has been issued under the sole responsibility of the manufacturer.
The object of the declaration is in conformity with relevant UK legislation.
Certified: Authorized Representative:
Marcel Dutrieux
Manager European Product Integrity
Toro U.K. Limited
Spellbrook Lane West
Bishop’s Stortford
CM23 4BU
United Kingdom
Engineering Director
1959 West Fir Avenue
Perry, OK 73077, USA
Date _________________
Model Serial Number Description
XXXXX XXXXXXXXXXXXXXXXX
Loader
Model Classification Measured Sound
Power (dBA)
Guaranteed Sound
Power (dBA)
Engine Speed
(rpm)
Engine Power
(kW)
XXXX
Loader
XXX XXX XXXX XXX
Model HFC kg GWP CO
2
Equivalent (metric tonnes)
XXXX
134A XXXX 1430 XXXX
To Next Page
Loading...
Need help?
General
